Hi,欢迎访问上海仰光电子科技有限公司!
您当前的位置: 网站首页> 维修项目> 技术文章
维修项目
技术文章

力士乐英格玛特伺服驱动器F248蓄电池电压低怎么回事

发布者:hp    来源:上海仰光电子科技有限公司     发布时间:2023-11-24

力士乐英格玛特伺服驱动器F248蓄电池电压低怎么回事

力士乐英格玛特伺服驱动器维修

F248 Low Battery Voltage蓄电池电压低

Cause:

The connected motor has an absolute encoder.

连接的电机有一个绝对编码器。

The absolute position information is stored in the motor feedback.

绝对位置信息存储在电机反馈中。

 

This memory has a battery powered backup for the electronic circuit.

此存储器有一个电池供电的电子电路备份。

The battery is designed for a operating life of 10 years.

电池的设计使用寿命为10年。

 

f the battery voltage drops below 2.8 V, this message appears.

如果蓄电池电压降至2.8 V以下,则显示此消息。

The absolute encoder function is preserved for about 2 weeks.

绝对编码器功能保留约2周。

 

Instructions for Exchanging Batteries

更换电池的说明

Have the following tools and accessories ready:

准备好以下工具和附件:

Torx screwdriver, size 10

Torx螺丝刀,尺寸10

Needle nose pliers, torque wrench

尖嘴钳、扭矩扳手

New packaged battery (Part No.: 257101)

新包装电池(零件号:257101

 

力士乐驱动器维修:

If the control voltage of the installed battery is turned off, the absolute

position is lost.

如果已安装电池的控制电压关闭位置丢失。

The absolute position must be re-established through the process of the

command Set Absolute Measurement.

必须通过命令Set Absolute Measurement



转载请注明出处:上海仰光电子科技专业伺服驱动器维修,伺服电机维修
本文链接:http://www.shygdz.com/fuwu/Services_Show23407.htm
伺服驱动器维修 伺服电机维修  触摸屏维修   变频器维修


联系方式:

电话:021-50157782
手机:13817011982 微信同号
邮箱:shygdzi@163.com
联系人:张工
网址:http://www.shygdz.com
【 我们确保修好测试好给客户!!!!】

上一篇:英格玛特力士乐RAC2.3-200-380-A00驱动器C200故障代码查询
下一篇:没有了

最新相关内容推荐: